User's Manual

2. Installation

3. Optional

Accessories

1. Overview 4. Troubleshooting

5. Warranty, Safety

& Speciﬁcations

NOTE: If the system was purchased

without a REDMIKE or REDMIKE VC,

the REDMIKE Share will utilize the

BC-TXLT wall charger. Plug the wall

charger into an AC outlet and plug

the other end(s) into the CHARGER

jack on the REDMIKE Share.

1. Ensure that the REDMIKE Share is

turned OFF.

2. Make sure the cradle charger

is plugged into a wall outlet.

Connect one end of the charging

cable into the jack labeled

CHARGER on the bottom of the

REDMIKE Share.

3. Plug the other end into the

charging jack on the rear of the

cradle charger.

4. The LED on the microphone will

glow RED to indicate charging.

5. Leave the REDMIKE Share

plugged in overnight (8-10 hours)

to obtain a full charge.

REDMIKE SHARE: CHARGING

Before use, the REDMIKE Share should be charged. It will take 8-9 hours for

the REDMIKE Share to obtain a full charge. A fully charged REDMIKE Share

will last for over 7 hours of use. If the microphone is used daily, it should

be kept plugged into the charging cradle - REDMIKE Share can be left in a

charging cradle for up two weeks without causing degradation to battery life.