User's Manual

1. Overview 2. Installation

3. Optional

Accessories

4. Troubleshooting

5. Warranty, Safety

& Speciﬁcations

The TOPCAT is shipped ready to mount in a standard suspended ceiling grid. All

mounting hardware need to secure the TOPCAT in the ceiling is provided except

for that needed to wire the AC power to the chassis.

TOPCAT will distribute sound throughout a classroom of up to 1600 square feet.

The location of TOPCAT is critical to ensure even sound distribution.

1. Identify the center of the listening area of the classroom for optimum location.

See Figure 1.

2. Select a ceiling tile that is free of ﬁxtures (lighting, HVAC, etc.) nearest to the

center point.

3. Remove the selected ceiling tile for TOPCAT installation.

NOTE: Do not install where the integrated sensor/receiver (ISR) is in the

reﬂected light of a hanging light ﬁxture. The ISR can be removed from the

TOPCAT and placed elsewhere on the ceiling or classroom wall.

1. SELECT MOUNTING LOCATION

Fig 1: Identify the Center of the Listening Area