User's Manual

21
2. Set Up & Use /
Daily Operation
3. Optional Accessories
1. Overview
4. Maintenance &
Troubleshooting
5. Warranty, Safety
& Specifications
1. Make sure the cradle charger
is plugged into a wall outlet.
Connect one end of the charging
cable into the jack labeled
CHARGER on the bottom of the
Sharemike.
2. Plug the other end into the
charging jack into the wall charger.
3. The light on the microphone will
glow red to indicate charging.
4. Leave the Sharemike plugged in
overnight (8-10 hours) to obtain
a full charge. The light will turn
green when charging is complete.
Sharemike: Charging
PLEASE NOTE: The Redcat Access and Microphone(s) are registered
together at the factory. If you have purchased a Sharemike with your Redcat
Access, keep all components together as a system. Moving them from one
system, or room, to another will result in the need to re-register.