User's Manual

23
Sharemike: Charging
OPTIONAL ACCESSORIES
PLEASE NOTE: The Topcat and microphone(s) are paired together at
the factory and all components should be kept together as a system.
Moving them from one system, or room, to another will result in the
need to re-pair.
1. Make sure the charger is plugged into a wall outlet. Connect one end
of the charging cable into the jack labeled CHARGE on the bottom of
the Sharemike.
2. Plug the other end into the USB-C jack on the back of the cradle
charger.
3. If the Sharemike is registered as MIC 2, the MIC 1 light on the
microphone will glow red to indicate charging.
4. Leave the Sharemike plugged in overnight (8-10 hours) to obtain a full
charge. The light will turn green when charging is complete.
5. If Sharemike is registered as MIC 1, low battery and charging indicator
will be the MIC 2 light.
6. During charging the blue light will stay on.
MIC 1
STATUS
LIGHT
MIC 2
STATUS
LIGHT