User's Manual

20
DAILY OPERATION
Using Your Microphone as a Wireless Audio Link
Plug your external audio
equipment, such as a computer,
into the USB input on the
bottom of the Flexmike
USB cable sold separately.
Lightspeed oers a USB-A to USB-C
cable for sale (part #USBC)
2-WAY USB
2-WAY USB AUDIO OUTPUT
TIP: If your system includes two Flexmikes, you can use one mic for
instruction and the second mic to transmit audio through the system.
You can connect your second (or third) microphone to your computer’s USB port to enable a wireless 2-way audio link.
SEND AUDIO FROM THE COMPUTER to the 975
to ensure all audio from the computer (videos,
video conferencing, audiobooks, music, etc) can
be played through the Lightspeed 975 system
and speakers.
SEND AUDIO TO THE COMPUTER from the
975 to ensure the teacher’s Flexmike and any
student microphones are clearly picked up
by a video conferencing solution.
With the appropriate USB cable
(USB-C for Flexmike/Sharemike)
connect your microphone to
your computer’s USB port.
This will also power/charge your
microphone.
1
Open sound settings on your computer:
• Select FlexmikeAudio as the Output source to
send all computer audio to the 975 system
• Select FlexmikeAudio as the Input source
to use the Lightspeed microphones as
the computer microphone audio for video
conferencing and recording applications.
2
You may also need to select
FlexmikeAudio as the speaker and
microphone audio in your video
conferencing application the first
time you use it.
3
Need to
edit copy
for Topcat