User's Manual

22
1. Overview 2. Daily Operation
3. Optional
Accessories
4. Troubleshooting
5. Warranty, Safety
& Specifications
USING THE FLEXMIKE TO AMPLIFY
EXTERNAL AUDIO EQUIPMENT
The Flexmike includes a 3.5mm audio input jack to connect to an audio source
like a laptop or MP3 player. The Flexmike will transmit the audio signal to be
played through the system.
If your system includes two Flexmikes, you can use the second Flexmike to
amplify external audio equipment.
1. Adjust the volume of your laptop
or MP3 device to about 25% of
maximum.
2. Plug your external audio equipment
(for example, laptop), into the input
on the Flexmike labeled “INPUT”
using a 3.5mm patch cable.
2. Adjust the volume of the Flexmike
or audio source to achieve desired
loudness.
NOTE: turning up the volume too
high on the audio source can cause
excessive distortion in the audio.
AUDIO
OUTPUT
AUDIO
INPUT