User's Manual

21
2. Daily Operation
3. Optional
Accessories
1. Overview 4. Troubleshooting
5. Warranty, Safety
& Specifications
PAGEFIRST INTERFACE
This optional feature interfaces with an independent classroom paging system.
When the page is broadcast, all audio from the system is muted, ensuring
important and even emergency school-wide messages are never missed.
(For full installation details, refer to the Topcat Installation Guide.)
How it works:
1. PageFirst sensor clip is
hung around the lead wires
attached to the classroom
paging speaker.
2. The clip is connected to the
Topcat.
3. As a page is broadcast, the
sensor clip detects the audio
signal through induction
and immediately mutes the
Topcat.
4. When the page is over, the
audio from the Topcat returns
to normal volume level.
Sharemike: Initial Set-up
1. Ensure the Topcat is on. The blue
light on the front of the Topcat will
glow.
2. Turn on the Sharemike by sliding
the pressing the power switch.
3. Grip the barrel in the center
section.
4. While speaking in a normal voice,
increase the VOLUME on the
Media Connector Microphone
level until your voice is barely
audible.
REMEMBER: This equipment is
designed to supplement and
distribute the user’s voice so they
are able to speak in a conversational
tone. Having the volume set too high
will result in feedback and listener
fatigue.
+
DC INPUT
24V/2.5A
PAGING
INPUT
AUDIO IN REGISTER PROGRAM
-