User's Manual

4
To avoid potential equipment damage and/or serious injury, READ
AND FOLLOW all safety precautions when installing Access Link.
WARNINGS are included throughout the procedural steps in this
guide, and are repeated below for emphasis.
• USE A LICENSED ELECTRICIAN FOR POWER CONNECTIONS.
Access Link system uses standard 100 – 240VAC power. Obtain
the services of a licensed electrician when supplying and
connecting power to the ceiling enclosure. BE SURE electrical
installation complies with local building codes. Improperly
installing and/or connecting power to the system may result in
EQUIPMENT DAMAGE, serious INJURY and/or DEATH.
• DO NOT INSTALL ALONE. The ceiling enclosure weighs
approximately 20 lbs (9 kg), and requires at least two people to
install. DO NOT install alone.
• USE SUITABLE LADDERS. Use proper ladders or support
platforms when installing Access Link enclosure. DO NOT stand
on chairs, tables, or other unsuitable surfaces.
• SUPPORT THE CEILING ENCLOSURE PROPERLY.
DO NOT allow the full weight of the ceiling enclosure to rest on
the tile grid of the ceiling. The ceiling enclosure is designed to
be suspended at TWO POINTS by suspension wires (secured to
raers or other suitable building structure) and to rest LIGHTLY
on the tile grid.
The lightning flash with arrowhead symbol
within an equilateral triangle is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure, that may be suicient magnitude to
constitute a risk of electric shock.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
Important Safety Instructions (cont.)
OVERVIEW