User's Manual

8
1. Overview
2. Set Up & Use /
Daily Operation
3. Optional Accessories
4. Maintenance &
Troubleshooting
5. Warranty, Safety
& Specifications
REAR PANEL CONTROLS AND
CONNECTIONS
REGISTER
USB POWER
5V/0.2A
+
–
AUDIO IN BAL. AUDIO OUT
AUDIO OUT
MIC LINE
AUDIO OUT/DC IN
1. REGISTRATION: Press this button
if there is a new component, such
as a microphone, to be registered.
2. USB POWER INPUT: Plug the
micro USB end of the power cable
into this USB port.
3. AUDIO INPUT JACK: 3.5mm
stereo connector for connecting
classroom audio sources to be
played through audio system.
4. BALANCED AUDIO OUTPUT:
This output sends the audio from
Access Link to a balanced input on
an amplifier. (Recommended for
longer cable runs connected to a
balanced input).
5. AUDIO OUTPUT: This unbalanced
output sends the audio from
Access Link to a an input on an
amplifier (Recommended for most
applications).
6. MIC/LINE LEVEL SWITCH:
Changes the audio output level
from low (MIC level) to high (LINE
level). Desired position depends
on the input level of the amplifier.
7. AUDIO OUT/DC IN: This RJ-
45 jack allows for a Cat 5 cable
connection to a Lightspeed
855/885 amplifier. This connection
sends audio to the 855/885 and
receives DC power.
3
2
4
1
2
5
2
USB power adaptor and
charging cable
2
7
2
6