User's Manual

9
1. Overview
2. Set Up & Use /
Daily Operation
3. Optional Accessories
4. Maintenance &
Troubleshooting
5. Warranty, Safety
& Specifications
REAR PANEL CONTROLS AND
CONNECTIONS
REGISTER
AUDIO INPUTS
DC INPUT
24V/2.5A
PAGEFIRST INPUT SPEAKER OUTPUTS
+ +
- -
ADJ
1 2
1. REGISTRATION: Press this button
if there is a new component, such
as a microphone, to be registered.
2. AUDIO INPUTS: 3.5mm stereo
connectors for connecting
classroom audio sources to be
played through audio system.
3. PAGING ADJ: Use the ADJ
control to adjust the sensitivity of
PageFirst if needed.
4. PAGEFIRST INPUT: Connect the
input from the optional PageFirst
sensor here when interfacing with
a building’s paging system.
5. SPEAKER OUTPUTS: This
euro-block connector is used to
connect the 955 Access to the
loudspeaker(s). Up to two 8-ohm
speakers can be connected to
each output.
Note: Wiring to these terminals
should follow the Class 2 wiring
methods as outlined in the
National Electric Code.
6. DC POWER: Plug the power
supply (24V/2.5A) into this jack.
1
2
3
2
2
5
2
4
2
6