User's Manual

27
1. Overview
2. Set Up & Use /
Daily Operation
3. Optional Accessories
4. Maintenance &
Troubleshooting
5. Warranty, Safety
& Specifications
PROBLEM: Most Problems are related to low battery power.
SOLUTION: Battery Check
• Confirm batteries are charged each night. A blinking red light on the power
button indicates a low battery.
• Confirm proper batteries are used. The Flexmike requires the Lightspeed
NH2.4V rechargeable battery pack. The Sharemike requires the Lightspeed
BA-NH2APK rechargeable pattery pack.
• Make sure the microphones obtain a full charge. A full charge takes 8-9 hours.
• When plugging the charging cable into the transmitter, ensure the red
charging light turns on. The green light will turn on when a full charge is
reached.
PROBLEM: Microphone doesn’t indicate a “Ready” signal (solid blue or red light)
SOLUTION: Follow these steps to ensure the system is ready to use.
• Ensure the power button on the microphone is turned on. Once turned on,
the blue light should begin blinking.
• Power the microphone off, then on again after a few seconds. Wait for up to
30 seconds for the blue light to turn solid, indicating READY for operation.
PROBLEM: Low Volume or Feedback
SOLUTION: Follow these steps to eliminate low volume or feedback.
• Check microphone volume level on the 955 Access. If the volume is too high,
feedback will occur. Adjust accordingly.
• Check input volume level on the 955 Access. If the volume is too high,
feedback will occur. Adjust accordingly.
• Adjust the volume level on the Flexmike.
PROBLEM: No Sound From speaker and wireless components.
SOLUTION: Follow these steps to produce sound from 955 Access.
• Confirm that the blue POWER light located on the front panel of the 955
Access is on.
• Confirm the microphone is powered on and linked to the 955 Access. The
mic 1 status light will be green on the 955 Access indicating the microphone
is linked.
• Confirm that the microphone is turned on. There will be a solid blue light on
the top of microphone to indicate it is powered on and ready.
Note: Most problems are directly related to low battery power. Please run
through the “Battery Check” items first. For remaining troubleshooting, use
known good, fully-charged batteries.
If you review these instructions and still have questions, call Lightspeed
Technical Services at 800.732.8999, 5 a.m. – 5 p.m., PST. Customers outside
the U.S. should contact their local reseller.
TROUBLESHOOTING