User's Manual

18
1. Overview
2. Set Up & Use /
Daily Operation
3. Optional Accessories
4. Maintenance &
Troubleshooting
5. Warranty, Safety
& Specifications
1. Make sure the charger is plugged
into a wall outlet. Connect one
end of the charging cable into
the jack labeled CHARGE on the
bottom of the Sharemike.
2. Plug the other end into the USB
jack of the wall charger.
3. If the Sharemike is registered
as MIC 2, the MIC 1 light on the
microphone will glow red to
indicate charging.
4. Leave the Sharemike plugged in
overnight (8-10 hours) to obtain
a full charge. The light will turn
green when charging is complete.
5. If Sharemike is registered as MIC 1,
low battery and charging indicator
will be the MIC 2 light.
6. During charging the blue light will
stay on.
SHAREMIKE: CHARGING
PLEASE NOTE: The Access Link and Microphone(s) are registered together
at the factory. If you have purchased a Sharemike with your Access Link,
keep all components together as a system. Moving them from one system,
or room, to another will result in the need to re-register.