User's Manual

16
1. Overview
2. Set Up & Use /
Daily Operation
3. Optional Accessories
4. Maintenance &
Troubleshooting
5. Warranty, Safety
& Specifications
1. At start of day, unplug the microphone from the
charging cable and put on.
• The microphone will default to the Mute position,
the status will turn to red.
• Place the microphone around your neck.
• Press the power/mute button, the light will turn
blue, indicating the microphone is active and ready
to use.
• Adjust volume with the UP/DOWN buttons if
necessary.
• If Flexmike needs to be powered down for some
time, press and hold the power button. To power
Flexmike again, press and hold the power button
until the blue light begins to blink.
2. Private conversations.
• Mute the Flexmike during private conversations
by momentarily pressing the power button. When
muted, the blue light turns red.
• When conversation is over, momentarily press the
power button again to unmute the Flexmike.
3. End of day.
• Remove the Flexmike from around your neck.
• Plug the Flexmike into the charging cable and
ensure the wall charger is plugged in to an outlet.
• The Flexmike will stay powered on during charging,
but will automatically be muted.
• It is not necessary to turn off the 955 Access as it
will automatically power down after 2 hours without
activity.
• If you do want to manually power it down, press
and hold the power button on the front of the 955
Access. If the 955 Access is powered down, then
when Flexmike is removed from charging the next
day, it will automatically power the 955 Access on.
DAILY OPERATION
INSTRUCTIONS
Power /
Mute
AUDIO INMICROPHONE TONE
POWER
MIN
1
MAX MIN MAX TREBLE BASS
2
AUDIO OUT
MIN MAX