User's Manual

28
1. Overview 2. Initial Set-up 3. DaiIy Operation
4. Additional
Information
5. Maintenance &
Troubleshooting
6. Safety &
Specifications
4. USING OPTIONAL SPEAKERS #5-6
1. Operation
• If speakers #5-6 are purchased
together with the original
system, they will already be
paired together and operate just
as speakers #1-4 do.
• To select the speakers, simple
press the #5-6 buttons on the
remote. (See Section 3 for daily
operation instructions).
• If the speakers were purchased
at a separate time from the rest
of the system, they will need to
be linked to the base station.
Please refer to the Group
Speaker Registration Process on
page ___.
2. Charging
• Group speakers #5-6 charge via
cable connected to the base
station.
• Connect the included charging
cable(s) to the CHARGING
OUTPUT jack(s) on the base
station.
• Connect the other end of the
jack to the CHARGE input jack
on the group speaker.
• The charging light on the group
speaker will turn RED to indicate
charging. It will turn GREEN to
indicate the unit is fully charged.
Although the standard FLEXCAT includes 4 group speakers, it is can to operate
with up to 6 group speakers! The additional speakers can be purchased together
with the main system or can be added down the road.