User's Manual

15
1. Overview 2. Initial Set-up 3. DaiIy Operation
4. Additional
Information
5. Maintenance &
Troubleshooting
6. Safety &
Specifications
1. REDCAT ACCESS: this will
automatically power on when
plugged into power and/or
when a Flexmike is powered on.
2. SPEAKER PODS: locate the
power switch on the bottom
of all the pods. Switch to the
ON position. The pod # light
will light as will the blue power
indicator.
3. FLEXMIKE: the microphone
will power on when removed
from the charger. The solid red
light indicates the microphone
is muted. Press to un-mute the
microphone, the light will turn
blue.
4. TEACHER REMOTE: there
is no power switch on this
component, it stays ready for
operation.
1. SPEAKER PODS: the blue
power light on top of the
pod will turn solid after a few
seconds to indicate it is ready for
operation.
2. FLEXMIKE: the Teacher 1 or
Teacher 2 light will turn solid
blue to indicate it is ready for
operation.
3. TEACHER REMOTE: press
a pod # button to test. If the
button lights, the remote is
ready.
4. POWER ON ALL COMPONENTS
5. ENSURE ALL COMPONENTS ARE READY
VOL
ON
REG
READY
REGISTER
GROUP
#
OFF
POWER
Power / Mute
Power