User's Manual

14
1. Overview 2. Initial Set-up 3. DaiIy Operation
4. Additional
Information
5. Maintenance &
Troubleshooting
6. Safety &
Specifications
HEADSET FUNCTIONS
Standard over-ear headset:
1. EAR HOOK: this rubber hook
is designed to be placed over
the ear. It can slide up or down
to adjust for ear size and can be
swiveled around the center post
to allow the headset to be worn
on the left or right side of the
head.
2. MICROPHONE: this
microphone boom should be
located near the mouth as
shown in the diagram. It can
rotate to be positioned either on
the left or right side.
3. EAR PIECE: the ear piece
should be inserted into the ear
canal as pictured.
4. CONNECTOR: insert this 2.5mm
connector into the headset
connection on the belt-pack.