User's Manual

28
1. Overview 2. Initial Set-up 3. DaiIy Operation
4. Additional
Information
5. Maintenance &
Troubleshooting
6. Safety &
Specifications
4. USING OPTIONAL SPEAKERS #5-6
1. Operation
UÊ If speakers #5-6 are purchased
together with the original
system, they will already be
paired together and operate just
as speakers #1-4 do.
UÊ To select the speakers, simple
press the #5-6 buttons on the
remote. (See Section 3 for daily
operation instructions).
UÊ If the speakers were purchased
at a separate time from the rest
of the system, they will need to
be linked to the base station.
Please refer to the Group
Speaker Registration Process on
page ___.
2. Charging
UÊ Group speakers #5-6 charge via
cable connected to the base
station.
UÊ Connect the included charging
cable(s) to the CHARGING
OUTPUT jack(s) on the base
station.
UÊ Connect the other end of the
jack to the CHARGE input jack
on the group speaker.
UÊ The charging light on the group
speaker will turn RED to indicate
charging. It will turn GREEN to
indicate the unit is fully charged.
Although the standard FLEXCAT includes 4 group speakers, it is can to operate
with up to 6 group speakers! The additional speakers can be purchased together
with the main system or can be added down the road.