INFRARED CLASSROOM AMPLIFICATION SYSTEM USER'S MANUAL 780iR
System Installation
1. Unpacking Your System
2. Location
Before installing the system, take time
to consider the placement of your
components.
3. Speaker(s)
4. Receiver/Amplifier
Overall System Specifications:
Carrier Frequencies (IR) 2.06/2.54 MHz
Frequency Stability +
/‒ 3%
Maximum Deviation +/‒ 50 kHz
Dynamic Range > 80 dB
Signal-to-Noise Ratio > 90 dB
Frequency Response 40 Hz - 20 kHz (‒ 3 dB)
Receiver Specifications:
Receiver Type Superheterodyne
Receiver Sensitivity 6
µV for 60 dB S/N ( > 25 dBuV)
Image and Spurious Rejection > 40 dB
Reception Selectivity 40 kHz
Squelching Threshold 3.2
µV
Amplifier Specifications:
Power Output (System Total) 12 W per channel (72 W)
Total Harmonic Distortion < 1% @ 20 W
Speaker Load Impedance 4 Ohms
Power Supply (UL Listed) 24 V/2.5 A
Dimensions 18 x 9 x 3 (H x W x D inches)
Weight 7 lbs.
Inputs:
TV/VCR RCA ‒ Line Level
CD/Tape RCA ‒ Line Level
Computer RCA ‒ Line Level
Auxiliary RCA ‒ Line Level
IR Sensors (6) F Connector
Outputs:
Auxiliary Outputs (2) 3.5 mm
Speaker Outputs (6) 1/4
Transmitter Specifications:
Audio Distortion < 1%
Spurious Emissions < 30 dB
Built-in Microphone Uni-directional Electret
Battery Power (1-year warranty) 2 AA NiMH Rechargeable
Dimensions 1.4 x 1 x 4.6 (W x D x H inches)
Weight 3.04 oz (w/batteries)
External Sensor:
Power By Receiver Unit
Reception Coverage 360
º, Ceiling-mount
Cable 40 ft., Plenum-rated Co-ax
Mounting Ceiling clip/Wall bracket
Diodes 32
[3]
[16]










