Instructions / Assembly

ManualsBrandsLightShow ManualsKitchen6 ft. Holiday Lamp Post

Safety Information Installation

Pre-Operation

Package Contents

IMPORTANT SAFETY

INSTRUCTIONS

When using electrical products, basic precautions should

always be followed, including the following:

READ AND FOLLOW ALL

SAFETY INSTRUCTIONS.

b. This is an electric product-not a toy! To avoid risk of fire,

burns, personal injury and electric shock it should not be

played with or placed where small children can reach it.

c. Do not use seasonal product outdoors unless marked

suitable for indoor and outdoor use. When products are used

in outdoor applications, connect the product to a Ground

Fault Circuit Interrupting (GFCI) outlet. If one is not provided,

contact a qualiﬁed electrician for proper installation.

d. This seasonal use product is not intended for permanent

installation or use.

e. Do not mount or place near gas or electric heaters, ﬁreplace,

candles or other similar sources of heat.

f. Do not secure the wiring of the product with staples or nails,

or place on sharp hooks or nails.

g. Do not let lamps rest on the supply cord or on any wire.

h. Unplug the product when leaving the house, when retiring

for the night, or if left unattended.

i. Do not use this product for other than its intended use.

j. Do not hang ornaments or other objects from cord, wire, or

light string.

k. Do not close doors or windows on the product or extension

cords as this may damage the wire insulation.

l. Do not cover the product with cloth, paper or any material not

part of the product when in use.

m. This

product has a polarized plug (one blade is wider than

the other) as a feature to reduce the risk of electric shock.

This plug will fit in a polarized outlet only one way. If the

plug does not ﬁt fully in the outlet, reverse the plug. If it still

does not ﬁt, contact a qualiﬁed electrician. Do not use with

an extension cord unless plug can be fully inserted. Do not

alter or replace the plug.

n. This product employs overload protection (fuse). A blown

fuse indicates an overload or short-circuit situation. If the

fuse blows, unplug the product from the outlet. Also unplug

any additional strings or products that may be attached

to the product. Replace the fuse as per the user servicing

instructions (follow product marking for proper fuse rating)

and check the product. If the replacement fuse blows, a

short-circuit may be present and the product should be

discarded.

o. Read and follow all instructions that are on the product or

provided with the product.

p. For indoor and outdoor use. Use A/C power for the unit.

q. To avoid the risk of electric shock, always make sure

the lamp is unplugged from the electrical outlet before

assembling, disassembling, or relocating.

SAVE THESE

INSTRUCTIONS

Step 1. Carefully remove contents from

packaging. Place base on ﬂat and

stable surface. If placed on uneven

surface, please pull out metal

stabilizer on base and insert yard

stakes into base and ground.

Step 2. Set the ﬁrst pole in the base, align

the grooves and turn clockwise

to lock.Repeat the process with

second and third poles by aligning

the grooves and turn clockwise to

secure in place.

Step 3. Place the lamp holder on the third

pole, align the grooves and turn

clockwise to be locked .

Step 4. Insert the banner into banner

hanger and insert banner hanger

into the short horizontal pole on

left side.

Step 5. Place light bulb onto the candle

holder. Place lamp topper on the

top by aligning the grooves and

gently turn clockwise to be locked.

Step 6. Add butterﬂy ribbon to the front of

the item.

CAUTION:

To reduce the risk of fire, do not

deliberately reposition either lamp holder contact.

SAFETY WARNING:

Remove all plastic

fasteners and tags. These are part of the packaging and

should be discarded.

Part Description Quantity

A Base 1

B Pole 3

C Banner Hanger 1

D Banner 1

E Lamp Topper 1

F C7 Light Bulb 2

G Lamp Holder 1

H Butterﬂy Ribbon 1

I Yard Stake 3

J 5 Amp, 125 V Fuse 1

Lamp Post

Summary of content (2 pages)

PAGE 1
Lamp Post Safety Information Installation IMPORTANT SAFETY INSTRUCTIONS Step 1. Carefully remove contents from packaging. Place base on ﬂat and stable surface. If placed on uneven surface, please pull out metal stabilizer on base and insert yard stakes into base and ground. 1 Step 2. Set the ﬁrst pole in the base, align the grooves and turn clockwise to lock.Repeat the process with second and third poles by aligning the grooves and turn clockwise to secure in place.
PAGE 2
Operation Troubleshooting Plug the lamp into a standard 120 V AC electrical outlet. Never plug the product into an electrical outlet unless it is properly assembled. Disconnect the plug when not in use - never pull on power cord to unplug. Problem: I plugged in my Lamp Post and it does not work. a. Ensure that the unit is plugged in. b. Ensure the toggle switch is in the desired position. c. Ensure the outlet your unit is plugged into has power. d. Unplug and re-plug the unit into its power source.