User manual

13
Connectivity
In order to perform all its functionalities on any computer, tablet and smartphone with
a Web Browser, LightShark features an integrated Web Server. You will only have to
connect to the WiFi access point of the LS-1 or LS-Core. As an alternative, you can
connect via an existing WiFi network or use the Ethernet port of the LS-1 or LS-Core
for a wired connection.
To connect to the WiFi access point of LightShark with your computer, tablet or
smartphone:
1 Check that the WiFi antenna is properly connected to the LightShark device,
plug the external power supply and turn on the device. The LCD display of the
device will light up, please wait until the device has started completely.
2 Navigate to the WiFi setup on your device (computer, tablet or smartphone)
and connect to the “LightShark-xxxx” access point. If this is the first time you
connect, the default password is “sharkjaws”.