Instructions / Assembly
When in use outdoors, install only to a covered GFCI electrical outlet that is weather proof. 
Make sure the outdoor adaptor and cord are assembled correctly and secured tightly to 
prevent water from entering the device 
1. Please read and follow all instructions and warnings both on the instructions and on the 
  product carefully before use.
2. Retain these instructions for future reference.
3. This product is to be used only as intended its use.
4. For indoor/ outdoor use.
5. If used outdoors, connect the product to a Ground Fault Circuit Interrupting (GFCI) recep
  tacle.
6. Do not mount or place near gas or electric beaters, fireplaces, candles or other similar 
  sources of heat 
7. Do not secure the wiring of this product with staples or nails, or place on sharp hooks, nails 
  or in a manner that can cut or damage the wire or insulation.
8. This is an electric product and not a toy! To avoid risk of fire, burns, personal injury and 
  electric shock it should not be played with or placed where small children can reach it. 
9. Do not close doors or windows on the product or extension cords as this may damage the 
  wire and insulation. 
IMPORTANT SAFETY INSTRUCTIONS
FAQ:
Warranty
Troubleshoong
1. If the whole tree don't light up.
Firstly please check if the components have been connected normally. Then please check 
whether the adaptor works well, including the plug cord has been connected properly to the 
adaptor in right position of male and female connection.
2. If one or more of the branches don't light up.
Please check each bulb on the unlighted branch has been well welded by toughing slightly, or 
bending the branch slightly, if it doesn't work please follow step 3.
3. Any problem not mentioned above or unsolved 
Please contact us for assistance.
Lightshare guarantees that this product is free of defect in material and workmanship, and 
provides a one-year limited hardware warranty for the product commencing from the date of 
purchase. Please keep your receipt for proof of purchase. This product is designed for light or 
decoration usage only. Using this device in any other capacity voids the warranty.
The warranty offered covers normal use. Defect or damage that result from improper 
operation, storage, misuse or abuse, accident or neglect, which are not the fault of Lightshare, 
are excluded from warranty coverage.
Q:How many times can each branch be bent ?
A:Please do not bend each branch more than 5 times as high-frequency bend will loose the 
connection between branches and also affect the appearance. If there is a loose, you are 
advised to bind it with an electrical tape in similar color of branches.
Q:If one of lights doesn't work, will it affect the run of the others ?
A:The others will not be affected and could work normally.
Q:Is the power supply safe for running ?
A:The voltage output of the power adapter is 12V. This product runs steadily and safely under 
the correct voltage. 
E HOME INTERNATIONAL INC.
19295 E.Walnut Dr. N. Ste B, City of Industry , CA91748
Phone: 626- 810-8166, Fax: 626-810-8005
Customer Service Line: (888) 997-9468 
www. ehomeinc.com
service@ehomeinc.com


