AB-0602N ARCHITECTURAL BALLAST DRIVER Version 0.10 Date 07/03/2012 www.lightronics.com Lightronics Inc.
Page 2 of 10 Version 0.10 AB0602N ARCHITECTURAL BALLAST DRIVER OWNERS MANUAL DESCRIPTION AND FEATURES 07/03/2012 See the DIMENSIONS AND LOCATIONS diagram for more information about mounting the unit. The AB-0602N is a 6 circuit, 2400 Watts per circuit ballast driver intended for non dimmable fluorescent and LED fixtures which can use a switched, remotely controlled 120VAC hot to operate them. A three circuit version (AB-0302N) is also available and operates identically.
Page 3 of 10 Version 0.10 AB0602N ARCHITECTURAL BALLAST DRIVER OWNERS MANUAL CONTROL SIGNAL CONNECTIONS 07/03/2012 DMX CABLE CONDUCTOR ARRANGEMENT FOR TWISTED PAIR, SHIELDED CABLE Common Shield DMX Data DMX Data + SMART REMOTE CONNECTIONS There are two types of smart remotes (push button and fader) which can be used with the AB-0602N. There are multiple models of each type. They all connect to a common RS-485 bus which is controlled by a AB-0602N.
Page 4 of 10 Version 0.10 AB0602N ARCHITECTURAL BALLAST DRIVER OWNERS MANUAL OPERATION SIMPLE REMOTE CONNECTIONS CAUTION REMOVE ALL POWER FROM THE AB-0602N BEFORE MAKING OR CHANGING SIMPLE REMOTE CONNECTIONS. Scenes 1 - 8 (stored in the AB-0602N) may be used by simple remotes. A BLACKOUT function may also be accessed. A simple remote is any switch that can provide a momentary contact closure which can be applied to a specific pin on the AB-0602N simple remote controls connector.
Page 5 of 10 AB0602N ARCHITECTURAL BALLAST DRIVER OWNERS MANUAL Version 0.10 07/03/2012 QUICK DMX ADDRESSING TO SET CHANNEL SOFTPATCH ADDRESSES The AB-0602N has a quick DMX address setup which enables you to set the starting address of the pack (the address for channel "A") without accessing the rest of the menu system. When used, the remaining 5 channels are set to the next consecutive addresses. Push SELECT at the dSEt menu.
Page 6 of 10 Version 0.10 AB0602N ARCHITECTURAL BALLAST DRIVER OWNERS MANUAL units. Multiple AB-0602N's and/or multiple smart remote wall stations may be connected together. The AB-0602N can store 64 preset scenes which can be activated by the smart remotes. These scenes are grouped according to which type of smart remote can use them. Scenes 1 - 32 are reserved for push button and IR remotes. Scenes 51 - 63 are used with fader remotes.
Page 7 of 10 AB0602N ARCHITECTURAL BALLAST DRIVER OWNERS MANUAL Version 0.10 07/03/2012 TO RECORD A SCENE FUSE REPLACEMENT Set the intensity for each channel in the unit to the desired brightness. REMOVE ALL POWER TO THE UNIT BEFORE REPLACING THE FUSE Hold MENU/NEXT for aprox. 5 seconds to access the menus. The display will show dSET. The only user serviceable part is a 1 1/4" X 1/4" fuse. Replace the fuse ONLY with a 1/2 Amp, 250VAC, fast blow fuse.
Page 8 of 10 Version 0.10 AB0602N ARCHITECTURAL BALLAST DRIVER OWNERS MANUAL 07/03/2012 MENU / DISPLAY OPERATION www.lightronics.com Lightronics Inc.
Page 9 of 10 Version 0.10 AB0602N ARCHITECTURAL BALLAST DRIVER OWNERS MANUAL 07/03/2012 DIMENSIONS AND LOCATIONS www.lightronics.com Lightronics Inc.
WARRANTY All Lightronics products are warranted for a period of TWO/FIVE YEARS from the date of purchase against defects in materials and workmanship. This warranty is subject to the following restrictions and conditions: A) If service is required, you may be asked to provide proof of purchase from an authorized Lightronics dealer.
