User Manual

SAFETY
• Always fit this product so that it can still be accessed
for servicing or maintenance. This product must not be
permanently embedded or bricked in.
• Turn off the system by pulling the plug of the
transformer from the socket for maintenance.
• Regularly clean the product with a soft, clean cloth.
Avoid abrasives that can damage the surface.
• Clean products with stainless steel parts with a
stainless steel cleaning agent once per six months.
• Do not use a high pressure washer or aggressive
chemical cleaning agents when cleaning the product.
This can cause irreparable damage.
• Protection class III: this product may only be connected
to safety extra-low voltage up to a maximum of 12 Volt.
• This product is suitable for outside temperatures of:
-20 to 50 °C.
• Do not use this product in areas where combustible
gases, fumes or liquids may be stored.
The product meets the
requirements of the applicable
EC and EAEU guidelines.
For questions about parts, service, any complaints
or other matters, you can contact us at any time.
E-mail: [e-mail]
Discarded electrical equipment must not be put in
the household waste. If possible, take it to a recycling
company. For details of recycling, contact a municipal
waste processing company or your dealer.
5 year warranty – visit our website at lightpro.nl for
warranty conditions.
5
YEARS
Attention
By the effects off the power factor* with LED
lighting the transformers maximum capacity is 75%
off its power.
Example: 21W -> 16W
 60W -> 48W
 100W -> 75W
The total Wattage of the system can be calculated
by adding up al Wattages from the connecting
lights.
*Would you like to know more about the power
factor? Go to our website www.lightpro.nl/
powerfactor for more information.