User Guide

READAND UNDERSTAND THESE INSTRUCTIONS BEFORE INSTALLING FIXTURE

INSTRUCTIONSHEETNO.

This

fixture is intended for installation in accordance with the National Electrical Code and local regulations.

To assure full compliance with local codes and regulations, check with your local electrical inspector before

installation. To prevent electrical shock, turn off electricity at fuse box before proceeding.

IS:7920

Retain these instructions for maintenance reference.

R0394 Page 1 of 2

INSTALLATION OF THE SLOPED CEILING ADAPTER FOR

(1)

Recessed Duo-CastTrim Calculates

(2) RecessedModular Frame-h Calculates

(3)

RecessedH.I.D.Downlights

I-I

C5 H TC> L I E R“

E[$~~~~i,N~~~~~s

PAGE 1
r READAND UNDERSTAND THESE INSTRUCTIONS BEFORE INSTALLING FIXTURE Thisfixture is intended for installation in accordance with the National Electrical Code and local regulations. To assure full compliance with local codes and regulations, check with your local electrical inspector before installation. To prevent electrical shock, turn off electricity at fuse box before proceeding. Retain these instructions for maintenance reference. INSTRUCTION SHEETNO.
PAGE 2
NSTRUCTION SHE~ NO. INSTALLATION OF THE SLOPED CEILING ADAPTER (Continued) 1S:7920 FIG. 6 Page2 of 2 W384 b. Attach DUO-CAST TRIM FRAME to SLOPED CEILING ADAPTER with flange down, by tightening (4) PHILLIPS HEAD POINTED SHEET METAL SCREWS. See Fig. 6 and instruction B. For Modular !! TlltE ~ A Ii’ PHILLIPS HEAO POINTEO _ SHEET METAL SCREWS (4) 3. ouo-cAsTTR\M Frame-In Calculates: CEILING ADAPTER by tightening (4) PHILLIPS HEAD POINTED SHEET METAL SCREWS. See Fig. 7 and 3. C. For Recessed H.I.