Manual

LED Floor Luminaire GU10 – SIMPLESSA
TECHNICAL SPECIFICATION:
Instruction Manual
ATTENTION:
Instant start is allowed.
Do not touch the lamp surface during operation. Risk of injury due to heat.
Designed for indoor applications.
The operating temperature of the luminaire is -20˚C to +40˚C.
CAUTIONS:
Consult your dealer if you have any enquiries.
Read the entire manual carefully before installation and operation.
DO NOT disassemble the inner part of the luminaire. Doing so may result in luminaire damage or malfunction.
Switch OFF the power source before installation, replacement and cleaning!
Wearing gloves during installation is recommended to ensure the luminaire is kept in the best condition.
Before replacement of the lamp or luminaire, turn it off and allow it to cool down. Heat-resistant gloves are mandatory when handling the luminaire.
The manufacturer accepts no liability for any damage resulting from the misuse of the luminaire or from when it is used with inappropriate equipment.
This product contains a light source of energy efficiency class <X >
Series Name SIMPLESSA
Model Number LM85685-2 LM85686-2 LM85687-2 LM85688-2
Color Nickel Chrome White Black
Lamp Holder GU10
Lamp Wattage 9W
G
700lm
Incl.Lamp LM85402-2 LM85409-2
Voltage 220-240V~
Frequency 50Hz
IP Rating IP20
Light source energy efficiency class <X>
Total Luminous Flux
IDV GmbH | Birkenweiherstraße 2 | D-63505 Langenselbold | Germany | www.lightme.eu
Correct disposal of this product:
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, recycle it responsibly, to promote the sustainable reuse of material resources. To return your device, please use the
return and collection systems, or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.
INSTALLATION
OFF
ON
1. Turn OFF the power.
2. Screw the standpipe together and onto the lamp base.
3. Insert the lamp (LM85402-2/LM85409-2) into the lamp holder.
4. Connect the luminaire to the mains.
5. Turn on the luminaire.
6. Turn ON the power.
1
6
2-3
2-1
2-2
3
4
5
HOME
GB
IP20

Summary of content (1 pages)