Manual

2
STRIKER LED INSTALLATION INSTRUCTIONS
TECHNICAL SPECIFICATIONS
• Power: 60 Watts
• Distance to 1 lux (pair): 754m
• Distance to 1 lux (single): 533m
• Input voltage range: 10 – 30V
• Current draw: 4.4 Amps @ 13.2V
• Colour temperature: 5000K
• LED estimated lifespan: 50,000 hours
• Operating temperature: -40° to 63°C
• Weight: 1kg (including mounting).
FEATURES
• Made in Australia
• 15 x high quality LumiLED LEDs providing
consistent high performance
• LED spot reectors with the ability to use
modular lters to produce a wide driving
light beam pattern or ood diffusion lter
for work light environment
• IP68 and IP69K resistant to water and
dust ingress
• 75mm slim footprint for multiple
mounting options
• Reverse polarity voltage protection and
high current waterproof connectors
• PCB designed with reduced electro
magnetic interference
• CE certied
• Thermal overload protection protects the
light from overheating
• Hard wearing UV stable powdercoat nish
• High pressure diecast aluminium housing
and bezel providing strength and weight
reduction
• Impact resistant polycarbonate lter for
added protection
• Genuine Gore
®
waterproof membrane
with mechanical seal
• 3 year warranty.
GENERAL CARE AND
SAFETY TIPS
To wash your lights, use plenty of warm
soapy water and a soft cloth only (this
prevents surfaces from marking). Never use
any solvent based cleaners or industrial
detergents when cleaning these lights as
permanent damage may occur.
PERSONAL SAFETY WARNING
WARNING: High intensity light source.
Do not look directly into the light during
operation, eye injury may result.