Installation Guide

2
DIY HARNESS INSTALLATION KIT
CONTENTS
• 1 x Driving light harness
• 1 x HB3 patch harness
• 1 x H4 patch harness
• 1 x Switch loom
• 1 x Screw for relay installation
• 4 x T-taps for wires (2 sizes)
• 4 x Spare crimps for custom wiring
• 6 x Spade terminals (2 sizes)
• 10 x Cable ties
• 1 x User instructions.
TOOLS AND CONSUMABLES REQUIRED
• Spanner to access battery terminals
• Pointy nose pliers
• Wire cutters
• Drill
• Phillips head driver bit
• Torch (recommended)
• Torque wrench (recommended).
TOOL REQUIRED FOR
NON-STANDARD INSTALLATIONS
• Crimping tool.
PERSONAL SAFETY WARNING
WARNING: High intensity light source.
Do not look directly into the light during operation, eye
injury may result.
Visit lightforce.com/installations to view
instructional videos.
DIY HARNESS INSTALLATION KIT INSTRUCTIONS