Manual

6
ELECTRICAL CONNECTIONS
Venom LED and Genesis LED lights are tted with a waterproof 4 pin electrical connector.
Included in the kit is the mating connector tted with short lengths of cable for integration with an appropriate
wiring harness. i.e. Harness must be capable of 15A per light.
If existing wiring harness is suitable, the included connector needs to be tted directly to your existing driving light
circuit.
CONNECTOR WIRE COLOUR IDENTIFICATION
1. Red: Positive for full intensity– connect to positive output wire on relay / vehicle harness
2. Black: Negative - connect to negative (earth)
3. Blue: Positive for day time positioning (optional) - connect to ignition signal wire
4. Yellow: Positive for night time positioning (optional) - connect to low beam signal wire.
NOTE: To operate night time positioning, ensure blue wire is also connected to ignition signal wire.
Warning: Only connect positioning lights in locations where they are legal to use. Please check local laws.
Blue
Yellow
Red
Black
VENOM LED & GENESIS LED
INSTALLATION INSTRUCTIONS