Manual

CROSS BOLT SECURITY FASTENER KIT

The simple to install security bolts and nuts will help protect your investment. (Part No. ATNSG2)

This kit contains 4 x M10 x 35mm anti-theft bolts plus 2 x M10 security nuts for the mounting bolts, both with

corresponding coded keys requiring a 17mm, 11/16” spanner.

For use with the Venom LED, Genesis LED and Striker LED Driving Lights.

SECURING LIGHT TO MOUNTING BRACKET - replace the 4 standard M10 bolts

• Remove the standard M10 bolts and washers from each side of the mounting bracket and t the anti-theft

bolts, reusing the existing washers. Each bolt is 35mm in length exclusively designed for use with the Genesis

LED and Venom LED driving lights.

SECURING MOUNTING BRACKET TO VEHICLE – replace standard nyloc nuts

• Remove the standard M10 nyloc nut and replace with anti-theft nyloc nuts as per diagram

All bolts are machined from 304 stainless steel. The key will only t the anti-theft bolts/nuts in one position. Coded

key is machined from steel with zinc protective coating.

Security Nut Socket

VENOM LED & GENESIS LED

INSTALLATION INSTRUCTIONS