Installation Guide

LED ILLUMINATED MIRROR
Installation Instructions
Blaze / Ruth
1. Remove the packaging careully, do not lose the screws
2.
Using a level,
mark off a horizon
tal line, and ensure
that the ends of the brackets are spaced to the width
between the
inner edges of the vertical aluminium
extrusions (see
illustration 1). Mark off the holes using a pencil.
3. Note: Screws supplied are only suitable for stud walls.
For drywall walls use special wall fasteners, available from
DIY or hardware stores. Seek advice from a specialist
about the suitability of screws to be used. Drill the
required holes and insert wall screws.
4. Screw the
bracket to
the wall using the
screws provided.
Please ensure the
screws are fully tight
but take care not to
overtighten.
5. Before making
any electrical con-
nections it is necessary to turn off the main electricity sup-
ply. This unit is provided with a supply cable already fit-
ted. This cable should be fitted to the household lighting
circuit or to a fused 3 AMP supply. Connections should
be made in accordance with the latest regulations. This
cabinet is manufactured to CLASS 1 and requires an earth
connection.
OPERATING INSTRUCTIONS
Light can be controlled by using the 3-way rocker under the mirror
to control warm-off-cold of lighting
125 Rt. 61 Schuylkill Haven, PA 17972
1-800-360-1585 • fax [phone] • [e-mail]
www.ltlhomeproducts.com
Illustration 1
Portrait or Landscape