Installation Guide

LED ILLUMINATED ALUMINIUM CABINETS
Installation Instructions
Vienna
125 Rt. 61 Schuylkill Haven, PA 17972
1-800-360-1585 • fax [phone] • [e-mail]
www.ltlhomeproducts.com
Pairing Bluetooth
®
enabled devices:
Pairing occurs when two Bluetooth
®
wireless technology enabled devices communicate with each other and establish
a connection. This information is then stored in the memory of each device meaning that once initially connected, the
two devices will not need to pair again.
Your Mirror can link with up to seven separate devices. When this limit is reached any additional devices paired will
erase previous connections to accomodate the new pairing.
Connecting your Bluetooth
®
enabled device to your Cabinet:
1. It is recommended that the Bluetooth
®
connectivity of the device you want to pair with your Cabinet is turned on
first to make connection easier.
2. The Bluetooth
®
device will be turn on by using the rocker switch inside the Cabinet
3. On the selected Bluetooth
®
enabled device select ‘Bluetooth’ from the Bluetooth
®
device list to connect to
the mirror.
Note: Devices running Bluetooth
®
Version 2.0 or earlier may need to enter a pairing code before a connection is made.
This code is a device default of 0000 or 1234. These devices will not need to enter a pairing code again after the initial
set-up. Some devices may also ask for the connection to be accepted, which will be prompted on the device screen.
4. Once connected, any music played on the paired device will play through the Cabinet.
The Bluetooth
®
connection will automatically cease when the two paired devices are out of range.
To turn off the Bluetooth® functionailty simply turn off the rocker switch on the inside of the cabinet on the left hand
side.