Installation Guide

Installation Instructions
1. Remove the packaging careully, do not lose the screws
2. Using a level,
mark off a horizon
tal
line, and ensure
that the ends of the brackets are spaced to the width
between the
inner edges of the
vertical aluminium
extrusions (see
illustration 1). Mark off the holes using a pencil.
3. Note: Screws supplied are only suitable for stud
walls. For drywall walls use special wall fasteners,
available from DIY or hardware stores. Seek advice from
a specialist about the suitability of screws to be used.
Drill the required holes and insert wall screws.
5. Before making
any electrical con-
nections it is necessary to turn off the main electricity sup-
ply. This unit is provided with a supply cable already fit-
ted. This cable should be fitted to the household lighting
circuit or to a fused 3 AMP supply. Connections should
be made in accordance with the latest regulations. This
cabinet is manufactured to CLASS 1 and requires an
earth connection.
Illustration 1
Release Leve
OPERATING INSTRUCTIONS
by using thr rocker switch under the mirror
Use remote controller to control the by referring the Operation Menu provided.
LED ILLUMINATED MIRROR
4. Screw the
bracket to
the wall using the
screws provided.
Please ensure the
screws are fully tight
but take care not to
overtighten.
Alpha TV Mirror
12" TV screen
USB/SD Port to allow
Rocker switch
USB/SD card insert
TV
125 Rt. 61 Schuylkill Haven, PA 17972
1-800-360-1585 • fax [phone] • [e-mail]
www.ltlhomeproducts.com