User's Manual

Using USB, Micro USB and Bluetooth Devices

Connecting to the Internet

The tablet utilizes WiFi 802.11b/g/n networks to connect with the internet. In order to

connect, you will need the following:

WI-FI

Available

Here

Network Name/SSID

Password

Wireless Router

Connect to a WiFi Network

Open the Action Center (swipe your ﬁnger inward from the right edge of the

screen), then tap or click All Settings > Network & Internet.

Or from the Task Bar tap the wireless network icon then connect to the

appropriate network. Tap (or click) Connect. When prompted enter the

password (if applicable).

Disconnect from a WiFi Network

Open the Action Center. Tap the wireless network icon that is connected, then

tap (or click) Disconnect.

USB ﬂash drive or hard drive

Insert a USB ﬂash drive or external hard drive into the

Tablet USB port using the included transfer cable.

You can also connect using the USB port located on the

right side of the keyboard case. In addition, you can add

an external mouse, connect a keyboard, or other USB

compatible device.

NOTE: The ﬁrst time you plug in a USB accessory, Windows will install the

necessary software for you (if applicable).

Add a Bluetooth device

Add or “pair” a Bluetooth compatible device with your Tablet as follows:

1. Power on the compatible Bluetooth device and make it discoverable.

2. From the Action Center open All Settings > Devices > Bluetooth. Turn on

Bluetooth then tap or click on Connected Devices. Tap or click to add a new

device. Once the Bluetooth compatible device is found, select it.

3. Make sure Bluetooth is powered on, then wait while Windows searches for the

device.