2.
TABLE OF CONTENTS Important Notices ......................................................................................................................................... 2 Congratulations .............................................................................................................................................. 3 Features ...............................................................................................................................................................
IMPORTANT NOTICES An LCD panel and/or video monitor may be installed in a motor vehicle and visible to the driver only if the LCD panel or video monitor is used for vehicle information, system control, rear or side observation or navigation. If the LCD panel or video monitor is used for television reception, video or DVD play, the LCD panel or video monitor must be installed so that these features will only function when the vehicle is in “park” or when the vehicle’s parking brake is applied.
CONGRATULATIONS Congratulations on your purchase of the AUDIOUVOX AVXMTG12U DVD player with Drop-Down Video/Monitor. The AVXMTG12U player has been designed to give you and your family many years of video entertainment in the mobile environment. Please read the directions that follow in order to familiarize yourself with the product to ensure that you obtain the best results from your equipment. FEATURES • • • • • • • • • • • • • • • 12.
IR TRANSMIT AND RECEIVE MODES (M1 OR M2) The AVXMTG12U has an option that allows the user to select from two IR transmit and receive modes (M1 or M2). This feature can be used when two AVXMTG12U units are installed in the same vehicle or if the vehicle has an RSA (Rear Seat Audio) that uses “A” channel headphones. When in the M1 mode the unit will transmit audio on the A channel. When in the M2 mode the unit will transmit audio on the B channel.
CONTROLS AND INDICATORS DIAGRAM Front View 1 2 3 4 5 6 7 8 9 10 11 12 1 17 16 13 14 15 1. Dome Lights - Provides additional interior illumination. 2. SOURCE (S) Button - Press to select the source menu (AV/DVD/USB/CARD). 3. VOLUME ( + ) Button - Press this button to increase the volume or increase the level of selected picture controls. 4. PIC. Button - Press this button to enter the picture adjustment mode. Press to adjust in the following sequence: Brightness, Contrast, Hue, Saturation, Reset. 5.
1. DVD Disc insertion Slot - For loading and removing disks. Turn the unit on before loading a disc. Make sure the unit is set to the DVD source prior to inserting a disc. Insert a disc with the label facing up towards the headliner. The player will load a disc when a disc is inserted. 2. DISC Indicator light - Illuminates when a disc is inserted. 3. Three Position Dome Light Switch: ON - Turn on the dome lights. OFF - The dome Lights will not turn on in this position.
REMOTE CONTROL OPERATION Battery Installation Before attempting to operate your remote control, remove the protective pull tab at the bottom of the remote. Battery Door Battery Replacement 1. Slide the battery holder (2) out in the direction of the arrow. 2. Install one CR2025 battery. Make sure that the proper polarity (+ or -) is observed. 3. Slide the battery holder into the remote control until it locks.
Remote Control Functional Description 1. POWER ( ) Button - Press this button to turn the unit ON and OFF. 2. NUMBER Buttons - Press to enter the numbers 0 to 9 for selection of CD tracks, DVD chapters or password setting. 3. PREVIOUS/UP CURSOR ( ) Button - Go to the previous chapter or track. The cursor is used to select menus on the screen. 4. MENU Button - Press this button to access the DVD root menu (DVD MODE). 5. OK Button - Used to implement a selected setting or menu option. 6.
Remote Control Functional Description 11. MUTE Button - Press this button to mute the audio. 12. DAY/NIGHT Button- This control toggles the unit between “ DAY” and “NIGHT” LCD illumination modes. In the “DAY” mode, the LCD backlight intensity is at maximum. In the “NIGHT” mode, the LCD backlight is dimmed to a preset level that is more suitable for low light operation. 13. FMM ON/OFF Button - Turns the wireless FM Modulator ON or OFF. 14. CHANNEL SELECT Button - Selects the wireless FM Modulator Frequency.
Remote Control Functional Description 21. STOP ( ) Button - Press this button to stop playback. 22. SOURCE Button - Press to select the source menu (AV/DVD/USB CARD). 23. SCAN FORWARD/RIGHT CURSOR ( ) Button - Scan forward at 2, 4, 8, 16, and 32 times speed. The cursor is used to select menus on the screen. 24. PIC. Button - Press this button to enter the picture adjustment mode Press repeatedly to adjust in the following sequence: Brightness, Contrast, Hue, Saturation, Reset.
DVD BASICS To get the optimum use out of the DVD player, please read this section. DVD Region Code The DVD player is preset to a region code at the factory depending on where the unit is sold. DVDs are also coded by region. These region codes must match in order for the disc to play. If the region codes do not match, the disc will not play. This system is set to Region 1 (USA) and will not play discs that have a region code different from Region 1. The system will display “WRONG REGION.
Types of Discs Your System Will Play Your system will play the following types of discs: • DVD disc - DVD discs that contain video. • Audio discs - Audio CDs that contain musical or sound content only. • MP3 discs - A disc that contains audio files (for example, a CD-R with downloaded MP3 files). This unit is capable of playing most recordable DVD formats. However, due to the variety of disc manufacturers and software, playback can not be guaranteed for every disc.
LOADING AND PLAYING DISCS 1. 2. 3. 4. 5. 6. Press the Screen Release (PRESS) button to unlock the LCD screen. The LCD screen will drop down slightly. Pivot the screen downward until a conformable viewing angle is reached. The hinge friction will hold the screen in position while the unit is in use. Press the power ( ) button on the unit or remote control to turn the unit on. Note: Unit must be set to DVD source to insert the disc.
General Setup Page Menu TV Display This item allows you to set the screen display format. Optional Settings: Normal/PS, Normal/LB, Wide The default setting is Wide. Note: This function depends on the aspect ratio with which the DVD disc is recorded. Angle Mark This item allows you to turn angle mode playback on or off. Angle mode allows you to select different camera angles in DVD playback. Optional settings: On, Off The default setting is Off. Note: The number of angles vary from disc to disc.
General Setup Page Menu (continued) Screen Saver This item allows you to turn the screen saver on or off. Optional Settings: On, Off The default setting is On. Note: The DVD player will enter screen saver mode if the unit is inactive for approximately four minutes. Password Setup Page Menu Password This item allows you to set a four number password. 1. Select the Change option. 2. Press the "OK" button. The Change Password screen appears. Note: The default password is 3308.
Preference Page Menu Audio This item allows you to select an audio language for DVD playback. The audio language depends on the information available on each disc. Optional Settings: English, Spanish, French, Italian. The default setting is English. Note: You can also change the audio language during playback by pressing the Audio button. Subtitle This item allows you to select a subtitle language to be shown on the screen. The subtitle language depends on the information available on each disc.
Preference Page Menu (continued) Default This item allows you to reset all settings to the original factory settings. Select this item and press the “OK” button. Note: This function does not reset the Parental level to the original factory setting. PLAYING JPG FILES 1. 2. 3. 4. 5. Place a JPG disc into the disc insertion slot, the unit will start reading the disc and play. Press the “MENU” button to browse JPG files. ” or “ ” cursor button to select a JPG file and press the “OK” button to confirm.
PLAYING MP3 FILES MP3 is a format for storing digital audio. An audio CD-quality song can be compressed into the MP3 format with very little loss of quality, while taking up much less space. CD-R discs that have been encoded in MP3 format can be played on a DVD player. The DVD player plays the songs in the order they were burned on to the disc. When playback is started, the elapsed time of the track that is playing will be displayed. 1.
SOURCE FEATURES 1. Press the “SOURCE” button on the unit or remote control. The following menu will appear on the screen: AV DVD USB CARD 2. Press the “ ” or “ ” cursor button to choose an item. 3. Press the “OK” button. DVD If a disc is loaded into the unit when the source is set to CARD or USB, the unit will automatically switch the source over to DVD.
Overhead Dome Lights The Dome Lights integrated into the unit are controlled by a three position slide switch. Sliding the switch to the ON position will turn the light ON. The OFF position will prevent the lights from turning ON with the vehicle interior lighting. The AUTO position will allow the lights to turn ON and OFF with the vehicle interior lighting. Refer to the installation guide for wire connections.
TROUBLESHOOTING Problem Solution IR remote is inoperative. 1. Verify that the batteries in the remote are fresh. 2. Verify that the infrared remote sensor is not obstructed. 3. Verify remote control mode (See page 4). Disc will not play or wrong region is displayed. 1. Insert a disc with the label side facing up towards the headliner. 2. Check the type of the disc you put into the disc tray. This DVD only plays DVD, audio CD, JPEG, and MP3. Bluray discs will not play in this player. 3.
Problem Solution Picture is distorted. 1. The disc might be damaged, try another disc. 2. It is normal for some distortion to appear during forward or reverse scan.
SPECIFICATIONS Type: Screen Resolution: Operation Temperature: Storage Temperature: Backlight: Power Source: Video Display System: Headphone Audio Output: Video Output: TFT Active Matrix LCD 1366 x 768 pixels (RGB) 32 to 122 °F (0 to 50 °C) -4 to 140 °F(-20 to 70 °C) LED 12 VDC NTSC/PAL 5mw @ 32 ohms 1.0 Vpp @ 75 ohms FCC Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
NOTES 24
12 MONTH LIMITED WARRANTY Applies to Movies To Go Mobile Video Products AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such defect(s) will be repaired or replaced with reconditioned product (at the Company's option) without charge for parts and repair labor.
www.audiovoxproducts.com © 2011 AUDIOVOX,150 Marcus Blvd.
