User's Manual

Lightbug User Manual Page 73 of 73
- Is the tracker indoors? If the tracker is indoors more
power will be used as the tracker will try to look for
a GPS fix before attempting to locate itself via WPS
or GSM. Find out more about this under
the How the
location technologies work section
- Make sure you have WiFi and GPS Safe Zones set up
where applicable
- Motion sensitivity: it might be that your tracker is
sending more location updates than it should
because the motion sensitivity is too high. This
usually occurs when the tracker is stationary but still
sending location update. Reduce the motion
sensitivity via your advanced configurations page.