User's Manual

Lightbug User Manual Page 7 of 73
Setting up your tracker
This section will highlight how to activate your tracker.
Charging your tracker before initial use:
You will need to charge your tracker as follows before initial
use:
The LightBug Zero needs to be charged for at least 2 hours
The LightBug Pro needs to be charged overnight
Charging your LightBug Zero:
The LightBug Zero is charged via any standard USB cable
either via wall adapter or via USB port.
It is advisable to use an adapter plugged into a power socket
rather than using a computer USB port or similar.
A full charge should be achieved in 2 hours. The LED
indicators on the LightBug Zero will turn off when it is
fully charged.