2 Light 'n" Easy Away uw, gry Quick Start Guidance i High-temperature Steam for Deep Cleaning Ready to Use in 30 Seconds OFT Power Cord Thank you very much for purchasing aur new shear map. Male aura to rec the Instructions carefully before sing. Please keen ths guidance for easy reference. For customer service call 1-844. 158 2632 (E:30am. 17:30pm Mor. Fri) ya java any questions.
{ Safety Instructions For Household Use only BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED WHEN USING THE STEAM MOP, READ ALL INSTRUCTIONS BEFORE USING, 1, Use the steam mop according to the guidance, 2. Please Ls the accessories that comply with manufacturer's recommendation. 3. Do not use it outdoors. 4. Remember to unplug it from the outlet when the mop is notion use. 5. Close attention is necessary when used by of near the children, pets of plants. 6.
En is Peeled Getting Started When assembling your steam mop thees may be some water in or around the water tank, because we test all our stern mops 100% before you buy them, PRODUCT INTRODUCTION 1. Mop handle 2 Pin point nozzle 3. Steam control panel 4. Water tank cover 5. Mira motion switch 8, Handheld steameriremavabile) 7. op heat 8 Maneuverable swivel 9. Steam mop main unit 10. Cord wraparound) 11. Cord wrapper) 12. Flexible hose 13. Filing cup 14. Clearing pad (3 pieces} 15. Window squeegees 16.
Stave Sane ACCESSORIES: Pin Point Nozzle Clean dirty stuff at comers or tight places. Store easy on a storage cll with the name of cord brainpower] orl the connecting tube. Window Squeegees Window squeegee which should be used with the exile hose can clean glass windows, mi mars, and other smooth surface. Cleaning Round Brush Cleaning round brush which should be used with the flexible has: can clean surface stains en showers, counter tops, and dish sink.
. STEAM MOP ASSEMBLY AND APPLICATION 1 Insert the mop handle into the steam mop main 2. Insert the handheld sterner into the steam mop main unfitting) 3, Put the steam mop head onto the mop cleaning pad. (fig) 4. Snap the mop head into the mop main unit by lining up the groove on the front of the mop unit with the groove an the back of the mop head, (fig) , Open the water tank cover on the tank, Use the filling cup to pour water into the tank figs} 6 Plugin the steam mop and the steamer start heating up.
Wey FNMA FILLING THE WATER TANK IMPORTANT: Before filling up the tank, make sure your steam mop is unplugged from the socket. 1 pen the water tank cover, Please look at the illustration for a visual explanation. 2, The filling cup included with your steam mop makes filling the water tank quite easy. Fill the cup with water and pour it inch the tank, just one cup of water is enough for your steam mop. De not overfill, 3.
Phat ares / = — Release Button CLEANING TIPS: 1. Tha pin point nozzle creates direct steam spray to clean and sanitize nooks & crannies and other places which is hard to reach or those wheres germs may be easily bred. Use the pin point nozzle to clean dirty stuff in corners or tight places where traditional nethermost and cleaning tools tend to push dirt into or even can't reach, 2.
Babe Cleaning teal 1. Please attach the flexible hose to the handheld steamer by inserting the flexible hes inch the handheld steamer. 2. Select the desired cleaning tool for using. Follow the cleaning tool sub-assembly instructions with select tool, 3. To remove the Edible hose, press and hold the release button on top of the Flexible hose, then make the flexible hose slide out. CAUTION: 1 De not press the steam touch button while attaching or removing the flexible hose. 2.
AFTER USING AND STORAGE: 1. When you have finished using the handheld steamer, reattach 't fo the mop by placing the handheld steamer into the mop housing first, 2, If you have finished mopping, unplug it from the outlet and place the mop into the upright position. Let the unit cool down for 2.3 minutes. 3, Remove the cleaning pad. 4. Empty the water tank before storage.
i Troubleshooting Guide Problem Possible Reasons & Solutions Steam Mop could not tum en 1. Your steam mop should be securely plugged in. Steam Mop could nat make steam 1. is there water In the water tank? If not, add water 1o your steam mop. 2. Fhe unit still does rt make steam, press the Hi, MED or LOW button to select a cleaning mode you want, Welt for 30 seconds, and tilt the handle to activate steam. 3.
Model Voltage Frequency Power Water Tank Capacity GREENBELT 1aov~ &0Hz 1550W TIPS: tis subject to change without notice due to continuing design and quality improvement. For better cleaning performance, please change the mop cleaning pad when necessary.
