User Guide

Put On The
Helmet And
Adjust The Fit
STEP FOUR - B
JAW PADS
• The LIGHT LS2 comes with a standard size jaw pad and
one (Youth) or two (Varsity) sets of jaw pad shims. The
jaw pad shims are designed to be installed underneath
the jaw pads and multiple shims can be stacked in
order to customize the fit.
• LIGHT Helmet jaw pads are attached with extra
strength hook & loop fasteners. The jaw pads should
fit firm against the jaw; however, should not cause
significant compression of the jaw pad foam.
• Additional jaw pad shims can be purchased from the
LIGHT Helmets website. Please take care when
removing the jaw pads and jaw pad shims from the
helmet so that you do not rip the hook & loop fasteners
off of the helmet.
6