User Guide

• Hold helmet with thumbs over the bottom of the jaw pads.

Place index ﬁngers into ear holes and pull down helmet into

position.

• If the helmet ﬁts too loose you can use the provided ﬁtment

shims to secure a better ﬁt. The ﬁtment shims are designed to

be installed underneath the ﬁtment pads and can be placed in

any location in order to customize the ﬁt of the helmet.

• If the helmet ﬁts too tight and moving the ﬁt pads does not

help to achieve a good ﬁt, please call or email LIGHT Helmets to

explore changing the size of the liner in the helmet or utilizing

half-thickness ﬁt pads.

• The ﬁt pads and shims utilize extra strength hook & loop

fasteners in order to keep the pads secure within the helmet.

• Please take care when removing the ﬁt pads and shims from

the helmet so that you do not rip the hook & loop fasteners oﬀ

of the helmet.

Put On The

Helmet And

Adjust The Fit

STEP FOUR - A

HELMET