Installation Guide

What type of Wi-Fi do I need ?
Like many devices, LIFX lights connect to the 2.4Ghz
band of Wi-Fi, not 5Ghz. If you have more than one
available network on your router, this could mean you
are connected to 5Ghz and need to try your other
network. Almost all Wi-Fi routers will have a 2.4 GHz
band so if you only have one network you will likely be
on the right one to get started.
How do I reset a light to factory settings ?
Turn the light o and on at the switch 5 times, about
one switch a second (not too fast). The lights will cycle
through four colors or whites and stop on white when
the reset has been successful. This is how you would
remove a light from a network to then add it to a
new one.
FAQS