Installation Guide

may impair contact making and lamp retention.

Interference

LIFX has been designed to minimise interference with other radio,

broadcast or receiving devices. The manufacturer is not responsible

for any interference caused as a result of modiﬁcations to the product

or by failure to adhere to the recommendations in this document and

at support.lifx.com. This device generates radio frequency energy

and, if not installed in accordance with the “recommended installation

requirements” may cause harmful interference to radio communication

devices. If the device is causing radio interference it is recommended

that the user try:

a. relocating the device to a dierent place;

b. adjust the antenna on the receiving device;

c. consult a technician experienced in radio interference.

Notices

• This device is not intended for use with emergency exits

• Use in open luminaire only

• Only use the control provided with or speciﬁed by these instructions to

control this lamp. This lamp will not operate properly when connected

to a standard (incandescent) dimmer or dimming control.

LIFX is not designed for use in:

• Excessively hot environments (e.g. close to ovens, radiators, heaters,

etc.)

• Regions or countries other than that in which the product was

intended for