Installation Guide
Déclaration d’exposition aux radiations
Cet équipement est conforme aux limites d’exposition aux rayonnements 
IC établies pour un environnement non contrôlé.
Changes & modification
Changes or modifications made to this device may void certification 
of the device. Changes or modifications made to this unit not expressly 
approved by the party responsible for compliance could void the user‘s 
authority to operate the equipment.
Frequency Information
Frequency Range (US & Canada): 2412-2462 MHz; 
Maximum radio-frequency power transmitted: 18.75 dBm 
Modulation type : IEEE 802.11 b/g/n20
Installation requirements & recommendation
This device should only be installed in light fittings and fixtures that are 
designed to accept each fitting. Lamps, fittings and fixtures that are 
designed to accept smaller or lower wattage light bulbs may result in the 
LIFX bulb operating below its optimal capacity. For optimal performance 
it is recommended that LIFX bulbs be fitted into fixtures that provide 
sucient air flow through and around the bulb. It is recommended that 
the LIFX bulb be installed away from other devices designed to receive 
or transmit radio signals. It is recommended LIFX bulb/s be installed 
and operated at a minimum distance of 30 cm from the body. For lamps 
with a weight significantly higher than that of lamps for which they are 
a replacement, attention should be drawn to the fact that the increased 
weight may reduce the mechanical stability of certain luminaires and 










