Full Product Manual

LIFX products be installed
and operated at a
minimum distance of 30 cm
from the body.
Interference
LIFX has been designed
to minimize interference
with other radio, broadcast
or receiving devices.
The manufacturer is
not responsible for any
interference caused as
a result of modifications
to the product or by
failure to adhere to the
recommendations in this
document and at support.
lifx.com. This device
generates radio frequency
energy and, if not installed
in accordance with the
“recommended installation
requirements” may cause
harmful interference to
radio communication
devices. If the device is
causing radio interference
it is recommended that the
user try:
a. relocating the device to a
dierent place;
b. adjust the antenna on the
receiving device;
c. consult a technician
experienced in radio
interference.
Notices
This device is not intended for use with emergency exits
Only use the control provided with or specified by
these instructions.
LIFX is not designed for use in:
Excessively hot environments (e.g. close to ovens,
radiators, heaters, etc.)
Regions or countries other than that in which the
product was intended for
When using LIFX
To avoid risk of shock, always make sure the product
is unplugged from the electrical outlet before
assembling, disassembling, installing, relocating,
servicing or cleaning it.
Do not open device, as this will void the warranty
If cleaning the product, use a soft dry cloth, do not use
cleaning agents.
Limited Warranty
General
Feit Electric Co (“LIFX“) warrants the LIFX bulb (the
“Product“), and only the Product, against defects in
materials and workmanship under normal use (“Defect”)
for a period of TWO YEARS (730 days) from the date of
retail purchase by the original purchaser (“Warranty
Period“). Under this Limited Warranty, if a defect arises
and a valid claim is received by LIFX within the Warranty
Period, at its option and to the extent permitted by
law, LIFX will either: 1. repair the Product at no charge,
using new or refurbished replacement parts --or-- 2.
exchange the Product with a new or refurbished Product.
In the event of a defect, to the extent permitted by