Full Product Manual

YOU WANT TO ATTACH TO A SOLID SURFACE
1B
OR
Screwing into
masonry?
Position the product
then mark where you
need your screws.
Drill two 1/4" holes.
Push in the provided
anchors. Line up the
mount and install
the screws into the
anchor. Done!
Ax
the light
Mount plate:
Pick the best place
to mount your light
and thread the cable
through the big hole
in the middle of the
mount.
If you're attaching
the mount to wood
or softer surfaces,
simply install it with
the provided screws.
Gently feed the cable
through as you lower
the Path light onto the
attached mount. Line up
the notches and put it onto
the mount. Twist the light
carefully to lock in place.
Prepare
Attach the
mount
If you have a square shaped
LIFX Path, this line indicates
where the straight edge will
line up so you can align it.
Use this to ax the Path light
to surfaces.