Installation Guide

MYQ-SGC1WLM
Smart Garage Camera™
Installation Guide
What's In the Box
Power
Adapter
Micro
USB
Cable
Reset Button
LED
Camera Lens
Ambient Light
Sensor
Microphone
USB Input
Mounting
Screws
Magnet
Mounting
Base
Dr
ywall Anchor
1. Connect Your Smart Garage Camera
™
Use the myQ
®
App, your mobile device, and your
router to control your Smart Garage Camera™.
Before You Start:
1. Be sure your mobile device's Wi-Fi
®
is on and
displays a strong signal where the camera will
sit.
2. Check that Bluetooth is enabled on your mobile
device.
3. Enable Location Services on your mobile
device.
4. Download the myQ
®
App.
TIP: If you already have the myQ
®
App, confirm
you have the latest version to optimize your
myQ
®
experience.
5. Create or sign in to your account.
6. Add your Smart Garage Camera™ to your
myQ
®
account.
2. Preparation
Check Your View Before You Mount:
l Power up the Smart Garage Camera™ in your
chosen mounting area.
l Smart Garage Camera™ is in reach of the
included 10' (3 m) Micro-USB cable and a
power outlet.
l Hold the camera at your chosen mounting area,
free from visual and metal obstructions. Check
your mobile device view shows what you want
to see before you mount.
l If using the magnetic mounting base screws for
a surface mount, mark the surface area to install.
l Power off the Smart Garage Camera™ by
unplugging it to begin a surface mount.
- 1 -
Installation Video
See the Smart Garage Camera™
installation video at
support.chamberlaingroup.com.
WARNING: This product can expose you
to chemicals including lead, which are
known to the State of California to cause
cancer or birth defects or other
reproductive harm. For more information
go to www.P65Warnings.ca.gov
3. Mount the Smart Garage Camera™
For Indoor Use Only
Items You May Need:
l Ladder
l Philips Screw Driver
l Drill and Drill Bit
l Hammer
Choose from Options A or B:
Option A: Magnetically Set to Garage Door Opener
Smart
Garage
Cam
1. Place the Smart Garage
Camera™ magnetic
mounting base on the
garage door opener, with
lens facing what you want
to see.
2. Wrap the cable around the
mounting base.
Option B: Surface Mount
1. Remove the
magnetic
mounting base
from the Smart
Garage
Camera™.
2. Position the magnetic mounting base at the
desired installation surface.
3. Insert screws provided with drywall anchors, as
needed.
4. Reassemble the Smart Garage Camera™ over
the magnetic mounting base.
5. Position the Smart Garage Camera™ with lens
facing what you want to see.
4. Connect Power
1. Power your Smart Garage Camera™ with the
included micro-USB power adapter and cable.
The LED lights solid white. After approximately
30 seconds, the LED flashes blue, blue-green,
then solid green. You are now connected.
2.
With your mobile device, access the myQ
®
App
| Devices and select the Smart Garage Camera™
camera icon to view the live video.
3. Adjust the Smart Garage Camera™, twisting the
posable camera head to change the viewing
angle.