Operation Manual

ManualsBrandsLiftmaster ManualsVehicle828LM Internet Gateway

Table Of Contents

Once you have successfully created your LiftMaster

MyQ

account, you must add the

LiftMaster

Internet Gateway to the account. It is easy to do from a computer; this can

also be done from an internet enabled smartphone or tablet. See section 3 for

downloading the MyQ

app and sections 5 and 6 for using the app.

• To add the LiftMaster

Internet Gateway to your account, the GREEN LED on the

Internet Gateway must be on continuously. If the GREEN LED is off, see Section 1,

Connect & Create. The LiftMaster

Internet Gateway must have an internet

connection for the website or phone to find it.

• In the www.myliftmaster.com website, add the LiftMaster

Internet Gateway.

Click on “Manage Places” to add the Internet Gateway. If this is the first LiftMaster

Internet Gateway connected to the account, the screen will already be at the step

of “Register Gateway”. You will need the SERIAL NUMBER from the bottom label

of the Internet Gateway. The serial number is a series of ten characters,

0 – 9 or a – f. Be sure to use the correct characters (e.g., a zero “0” instead of an

“O”) and keep the character spacing correct (XXXX-XXX-XXX). If this is the

second LiftMaster

Internet Gateway to be added, just click on

“Manage Places>Add New Place”. For instructions on how to complete this step

with the MyQ

app, see sections 5 and 6.

• Name the LiftMaster

Internet Gateway (e.g., “123 Main Street” or “Home Sweet

Home”). Click “Save and Close” to complete this step.

• You can add MyQ

devices like the garage door opener, gate operator, lights, or

other accessories from the “Manage Places” page, or you can download the MyQ

app and add any MyQ

device from a smartphone or tablet. To add the garage door

opener or other devices, click on “Manage Places>Add New Device” and follow

the steps.

Once you click ADD you have 3 minutes to go to the garage door opener

or device and press it’s learn button. To add a gate operator ensure that the gate is

closed. Give the operator an OPEN command. Within 30 seconds, when the gate is

at the open limit press and release the reset button 3 times (on primary gate). The

LiftMaster

Internet Gateway will pair to the operator.

Once a device is programmed, it will appear on the screen. You can then name

the device (e.g., left garage door, table lamp, etc.).

INTERNET

GATEWAY & ADD DEVICES