User Guide

42
Chapter 11: Printing
Doc 6001197, Rev D
Chapter 11: Printing
This chapter will cover . . .
 Printing the Unit Information Report Page 42
 Printing the Directory Insert Page 43
Printing the Unit Information Report
Information reports concerning the unit configuration, directory codes, and entry codes can be
printed. To print the information reports, access the Work On Unit screen and do the following:
Figure 25: Information Report Setup Screen
1 Print Unit Data: On the Information panel, click the Print Unit Data button. The
Information Report Setup screen displays (Figure 25).
2 Configuration, Directory Codes, Entry Codes, All: Click the desired selection. An "X"
displays in front of the selection.
3 Font: Click the Font button to select the type of font that will be used in the report. The
Font selection screen will appear. This window is identical to the font selection screen in
Windows.
4 Print: Click the Print button. The unit's information will print.
5 Done: Click the Done button. The Work On Unit screen will appear.