User Guide

Chapter 4: New Unit Setup
19
Doc 6001197, Rev D
BUTTONS
Connect
Click to connect SVWin to the unit.
Disconnect
Click to disconnect from the unit.
Modem
Settings
Click to edit your modem settings; allows you to access the Modem Setup
screen.
Send Password
If Manual in the Connection Type box is chosen, click to send unit
password.
Control Panel
Click to display the Control Panel for Unit screen.
Cancel Click to cancel “Send All”, “Receive All’, or “Send Changes”. Clicking
Cancel also exits the screen without saving unit data.
Done Click to save unit data, exit the screen, and return to Work On Unit screen.
Clicking Done also cancels “Send All”, “Receive All’, or “Send Changes”.
STATUS INDICATORS
Connect Status
Box
Reports connection status and displays modem activity lights.
Status Report
Box
Reports communication activity.
Status Bar Helpful description of various functions (bottom of screen). Activated by
mouse movement.
Tx/Rx Lights that activate when SVWin transmits (Tx) and receives (Rx) data
to/from the unit.
DATA TRANSFER ERROR
A data transfer error may occur while sending or receiving data to/from the unit (e.g., from phone
line disconnection), thereby causing the data to scramble.
If this type of error occurs, you must Send All (if you were sending data) or Receive All (if you
were receiving data).