User Guide

✳✳
Use SAE 30 Oil (Never use grease or silicone spray).
✔✔
Repeat ALL procedures.
■■
Do not lubricate motor. Motor bearings are rated for continuous operation.
■■
Do not lubricate clutch or V-belt.
■■
Inspect and service whenever a malfunction is observed or suspected.
■■
CAUTION: BEFORE SERVICING, ALWAYS DISCONNECT OPERATOR FROM POWER SUPPLY.
Check at the intervals listed in the following chart.
HOW TO ORDER REPAIR PARTS
OUR LARGE SERVICE ORGANIZATION
SPANS AMERICA
INSTALLATION AND SERVICE INFORMATION
ARE AVAILABLE 6 DAYS A WEEK
CALL OUR TOLL FREE NUMBER - 1-800-528-2806
HOURS 7:00 TO 3:30 p.m. (Mountain Std. Time)
MONDAY Through SATURDAY
WHEN ORDERING REPAIR PARTS
PLEASE SUPPLY THE FOLLOWING INFORMATION:
PART NUMBER DESCRIPTION MODEL NUMBER
ADDRESS ORDER TO:
THE CHAMBERLAIN GROUP, INC.
Electronic Parts & Service Dept.
2301 N. Forbes Blvd., Suite 104
Tucson, AZ 85745
EVERY EVERY EVERY
ITEM PROCEDURE 3 MONTHS 6 MONTHS 12 MONTHS
Drive Chain Check for excessive slack.
Check & adjust as required.
Lubricate.*
●✔
Sprockets Check set screw tightness
●● ✔✔
Clutch Check & adjust as required
●● ✔✔
Belt Check condition & tension
●● ✔✔
Fasteners Check & tighten as required
●● ✔✔
Manual Disconnect Check & Operate
●● ✔✔
Bearings & Shafts Check for wear & lubricate
●● ✔✔
MAINTENANCE SCHEDULE
11