User Guide

Limit Switch
Enclosure
Explosion Proof
Motor
Junction Box
(As Required)
Control
Station
Electrical
Enclosure
SEE
NOTE 7
Coil Cord or
Take-Up Reel
(Optional)
Safety Switch (Optional)
1
3
2
1
4
5 5
HAZARDOUS LOCATION
CLASS I, II, DIVISION 1
GROUP D, E, F & G
NON -
HAZARDOUS
LOCATION
1

2 3 4 5
6. 7. 8. 9.
NON-ENERGY STORING DEVICES SUCH AS LIMIT SWITCH ASSEMBLY, SAFETY SWITCH, AND OPERATOR CONTROL STATION. FACTORY INSTALLED JUNCTION BOX WITH INTRINSICALLY SAFE WIRING FOR CONNECTION TO CONTROL AND LIMIT SWITCHES AS CLASS I, DIV. 1, GROUP D CLASS II, DIV. 1, GROUPS E F & G. EXPLOSION PROOF MAKE-UP BOX FACTORY INSTALLED. CONDUIT SEAL FACTORY INSTALLED. CONDUIT SEAL REQUIRED. INSTALLATION MUST BE IN ACCORDANCE WITH ARTICLE 500 OF THE NATIONAL ELECTRICAL CODE. THE NON-HAZARDOUS LOCATION OR CONTROL ROOM MOUNTED EQUIPMENT SHOULD NOT USE OR GENERATE MORE THAN 250Vrms. NO CHANGES SHALL BE MADE TO THIS DOCUMENT WITHOUT THE NOTIFICATION AND APPROVAL OF FACTORY MUTUAL.
MODEL GJX, 1/2 & 1 HP MODEL GTX, 1/2 & 1 HP MODEL GJX, 2 HP
CLASS I, DIVISION 1, GROUP D CLASS II, DIVISION 1, GROUPS E, F & G CLASS I, DIVISION 1, GROUP D CLASS II, DIVISION 1, GROUPS E & F
SUITABLE FOR
1

5